Datacomm 50-3323-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution – White


(as of Sep 20,2018 03:06:00 UTC – Details)

Our Home Theater products provide all the flexibility installers or experienced do-it-yourselfers need to create sophisticated media environments. Our plates mount into a standard NEMA enclosure or on to a low-voltage mounting bracket. Straightforward labeling on each plate simplifies room set up and configuration.Low profile design fits behind the industry’s thinnest TVs and mounts. 6 feet Extension Cord, 8 feet of Non-Metallic Electrical Wire
Brings power to your wall mounted TV without the added expense of installing an electrical outlet
Grounded recessed single receptacle allows power to be installed behind your wall mounted TV or other display
Connects your wall mounted TV or other display to your receiver or AV components
Cable pass-through ports on the top and bottom plates allow you to run your low voltage AV cables from your TV, through the top plate, inside the wall, and out through the bottom plate to connect to AV equipment
Mounting wings are molded onto the top and bottom plate and fasten against the drywall as you tighten
No low voltage mounting brackets or mud rings required
All-in-one kit includes everything you need – quick and easy to install

LabGenius MI0101001 Mini-Vortex Mixer, Blue(Top)/Clear(Body)


(as of Sep 19,2018 14:07:12 UTC – Details)

The LabGenius Mini-Vortex Mixer is a tiny titan specifically designed for shaking test tubes. Simply push the tube into the soft attachment to start shaking. Shaking stops as soon as you lift out the test tube. Full containers of 50mL can be activated for mixing within 5 seconds! The unit operates at a fixed speed of 3,000 rpm with an orbital diameter of 5.5 mm. Remarkably small footprint – just 4 inch diameter – and compact structure are perfect for the limited spaces of bench tops and fume hoods. It also has patented foot pads that keep the petite unit firmly in place while mixing. Its power supply meets CE, cULus, CCC, SAA, FCC and GS standards. Weight is just 0.55kg.Touch function for 3,000 rpm fixed
Orbit 5.5mm
Compact size – only100mm Dia x 78mm H
Universal voltage 100 – 240 V AC, 50 – 60 Hz

Heathrow Scientific HS24312B Peg Tube Rack, 96 Wells, Polypropylene, 10 to 13 mm, Blue (Pack of 2)


(as of Sep 19,2018 00:55:23 UTC – Details)

The Peg Tube Rack by Heathrow Scientific is a strong, tough, versatile tube rack for bench top working or tube storage. The peg tube rack is autoclavable and made from fiberglass-reinforced polypropylene. The fiberglass reinforcement keeps pegs stiff and straight through repeated autoclaving. The spacious peg design allows easy viewing and identification of tube contents. The peg tube rack’s versatitly allows the unit to be used as a drying rack, for glass plates or upside-down tubes. Includes embossed indexing, ribbed grips, and drainage holes.

Specifications: Tubes: 7mL, Wells: 96, Well Diameter: 10 to 13 mm, Dimensions: 3.2 x 4.96 x 2.71 in (8.2 x 12.6 x 6.9 cm), Quantity: 2 pack, Color: Blue

Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes
Spacious peg design allows easy viewing of tube contents
Conveniently use as a drying rack for glass plates or upside-down tubes
Includes embossed indexing, ribbed grips, and drainage holes
Pegs remain straight even after repeated autoclaving

Bel-Art F18788-1600 Poxygrid “Half-Size” Test Tube Rack; 15-16mm, 24 Places, 4¹⁵/₁₆ x 3⁵/₈ x 2¹/₂ in., Green


(as of Sep 18,2018 12:05:11 UTC – Details)

Welded steel wire racks with epoxy coating to protect against rust and corrosion. SP Scienceware a division of SP Industries is home to Bel-Art and H-B Instrument brand products. Each brand has a proud heritage in the laboratory supply market and manufactures state-of-the-art laboratory equipment and biological drug manufacturing solutions that include market leading brands Genevac, Virtis, Hull, FTS systems and National-Hotpack. As part of a larger organization committed to science we look forward to increased opportunities to serve our customers and remain committed to developing, manufacturing and delivering innovative products, right in value. We appreciate your business and thank you for the opportunity you have given us.Durable and smooth coating is impervious to organic solvents, salts, weak acids and weak alkalis
Poxygrid “half-size” is an ideal space saver, perfect for use in water baths, under fume hoods, and other limited space locations
Holds 13-16mm tubes in a 6 x 4 configuration
Epoxy coated steel wire racks are chemical and corrosion resistant
Withstands temperatures ranging from -223C (-369F) to autoclaving at 121C (250F) and can be autoclaved

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy – 2 oz.

$5.27 - $4.67

(as of Sep 17,2018 22:35:48 UTC – Details)

J-B Weld KwikWeld Quick Setting Steel Reinforced Epoxy

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F.

Great for:

  • Household Repairs
  • Automotive
  • Plumbing
  • Marine
  • Crafts and More
  • Use on:

  • Automotive
  • Brick
  • Concrete
  • Fiberglass
  • Metal
  • And more
  • Instructions

    1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
    2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
    3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
    4. Dry: Sets in 6 minutes. Cures 4 hours. If temperature is below 40 degrees F, then set time is longer.

    J-B Weld is proudly made in the USAFast setting version of The Original J-B Weld two-part epoxy cold weld system
    Great for household repairs, automotive applications, crafts and more
    Sets in 6 minutes and cures dark grey in 4-6 hours and rated at a tensile strength of 2424 PSI
    Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled and will withstand temperatures of up to 300 degrees Fahrenheit
    J-B Weld is proudly made in the USA

    Nalgene Unwire Polypropylene Test Tube Rack, 13mm, Green (Case of 8)

    $24.90 - $24.83

    (as of Sep 17,2018 08:10:15 UTC – Details)

    These polypropylene racks are molded in one piece and have a three-tier, grid design. They withstand most chemicals and will not float or corrode in water baths. Letters and numbers on top tier aid in tube identification. Labels can be placed on large end plates. Racks for 13mm and 16mm tubes hold 72 tubes. Not autoclavable.Higher specific gravity than water so stays submerged in a water bath-won’t float
    Hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm sizes or up to 72 smaller diameter tubes can be held at once
    Available in four bright colors to help keep samples organized
    Endplates accept large labels – for easy identification of samples

    Home Brew Ohio Glass Hydrometer Test Jar 10″ with Plastic Base

    $13.00 - $9.72

    (as of Sep 14,2018 15:16:06 UTC – Details)

    This glass hydrometer Test jar has a wide plastic base to prevent tipping. The longer tube makes this Test jar perfect for any of the hydrometers. A Test jar makes taking hydrometer reading easier, and with less waste., glass hydrometer Test jar, 10 inch with plastic base, makes hydrometer reading easier, country of origin – United States, manufacturer name – Home Brew Ohio.Glass hydrometer test jar
    10 inch
    Makes hydrometer reading easier

    Bel-Art F18755-0001 Poxygrid Test Tube Rack; 13-16mm, 48 Places, 9¹/₂ x 3⁵/₈ x 2¹/₂ in., Blue


    (as of Sep 14,2018 01:38:53 UTC – Details)

    Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis, will withstand a temperature range of -223°C (-369°F) to 121°C (250°F) and can be autoclaved. Racks have square holes, three decks, a slotted grid bottom and reinforced edges. Blue rack, holds tubes from 15 to 16mm. 48 places in 4 x 12 rows. Overall measurements: 24.2 x 9.2 x 6.4cm (9-1/2 x 3-5/8 x 2-1/2″).Unaffected by organic solvents, salts, weak acids and weak alkalis
    Square holes, three decks, a slotted grid bottom and reinforced edges
    Withstands a temperature range of -223°C (-369°F) to 121°C (250°F); can be autoclaved
    Overall measurements: 24.2 x 9.2 x 6.4cm (9-1/2 x 3-5/8 x 2-1/2″)
    Blue; holds 48 tubes from 15 to 16mm

    Globe Scientific 118127K Polyethylene Flange Plug Cap for Test Tubes, 12mm Size, Black (Pack of 1000)

    $18.88 - $18.72

    (as of Sep 13,2018 12:22:08 UTC – Details)

    Globe Scientific’s polyethylene (PE) flanged plug caps provides exceptional leak-resistance in test tubes, centrifuge tubes and round cuvettes. They feature two flexible flanges that press firmly against the inside wall of the tubes, thereby providing better leak-resistance than standard plug caps.GLOBE – Cap- Flange Plug- 12mm- Blk , CS1000

    L-K Industries S10D2THD Borosilicate Glass Short Cone Centrifuge Tubes, Model “D”, 200%, Threaded, 6″ Height, 100 cu. ft. Capacity (Pack of 6)


    (as of Sep 12,2018 22:43:04 UTC – Details)

    L-K Industries is a market leader in durable, accurate, high-quality glassware. All glass centrifuge tubes conform to ASTM and API standards (ASTM D4007/API MPMS Ch. 10.3, ASTM D96/API MPMS Ch. 10.4, ASTM D1796) and can be used in regulatory environments. The most common application for these tubes is for separation of crude oil and basic sediment and water (BS&W) in centrifuges, but these tubes may be used in other applications including petroleum, hydrocarbons, agriculture, chemicals, etc. The graduated marks are permanently etched to improve visibility and provide longer life. Each centrifuge tube has a unique serial number to provide precise traceability. Custom markings are available for specific applications. The wide-thread and 2-mm thick wall configurations provide durability and high RCF capability. All tubes are inspected, calibrated and marked in-house using volumetric or gravimetric techniques. The newly minted laboratory obtained its ISO/IEC 17025 accreditation and as a result, all glassware is certified in-house. The oil centrifuge tubes come configured with a tooled top with a cork or rubber stopper, a wide-neck thread or standard thread. The tube markings can be measured in milliliters (100-ml) or percentage (200%). When running tests with 100-ml tubes, to determine the BS&W content in the petroleum liquid, the volume of two separate test samples must be added. When working with 200% tubes, the average of the two sample tubes is taken. The tube markings include standard or detailed markings. D Style – Short Cone tubes measure 6 3/8” long and are typically used in Transport models because of limited space; applicable standard(s): API 10.4/ASTM D96, ASTM D4007.Tubes conform to ASTM & API standards, meaning they can be used in most regulatory environments
    Graduated marks are etched permanently and filled with ceramic to improve visability and to ensure durability
    Each tube has a unique serial number to ensure tracability and also has a sand spot to write on
    In addition to our factory volumetric calibration, LK Industries offers gravametric calibrations at competetive pricing. Our tube are the most accurate on the market
    Tubes are rigorously tested for adherence to ASTM and API standards. We also use magnifying techniques to ensure there is no weakness in the glass prior to production